
Google Ads, Meta Ads, Telegram Ads, Yandex Direct, programmatic, YouTube and influencers give advertisers an enormous choice of digital tools.
But which tools does a particular business genuinely need? More importantly, what share of the budget should each receive?
Media mixes are often based on familiar assumptions:
“Everyone in Uzbekistan uses Telegram, so we need to be there.”
“Our competitors advertise actively on Instagram, so we should too.”
“Google Ads brings high-intent customers, so we need to increase its share.”
“Programmatic delivers broad reach, so it must be in the media plan.”
Each statement sounds logical. But platform popularity, a competitor’s success or expert recommendations do not guarantee efficiency for a specific business.
The central mistake is selecting advertising channels through assumptions unsupported by data.
Here is a more evidence-based approach to choosing channels and allocating budget.
📊 1. Historical data is the foundation
If the company has run campaigns before, start by analysing results by channel.
Do not compare only CTR, CPC or CPM. Ask:
- Which channels generated more qualified enquiries?
- Where was customer acquisition cost lower?
- Which platforms produced more sales?
- How did conversion, average order value and profitability differ?
- Which channels produced the strongest result relative to spend?
Telegram Ads may deliver cheaper visits than Google Ads while converting fewer of them into sales. Meta Ads may produce more expensive leads but attract customers with a higher purchase probability.
Historical data reveals actual channel performance rather than subjective beliefs.
Account for seasonality, advertising conditions, competition and attribution quality. Last year’s result may not repeat, so history is a starting point rather than a guarantee.
📈 2. Market benchmarks provide additional guidance
When available, use market benchmarks alongside internal statistics. These may describe typical channel performance in a sector, product category or market:
- CPM and CPC — indicative impression and click costs.
- CTR — average click-through rate.
- CPL and CPA — cost per lead or target action.
- Conversion Rate — traffic conversion into enquiries or purchases.
- CAC — customer acquisition cost when comparable data exists.
Benchmarks for Uzbekistan are particularly useful because advertising costs, competition, audience behaviour and channel performance can differ substantially from other countries.
Sources include platform research, industry reports, agency data and comparable campaigns. But benchmarks depend on industry, period, format, objective and measurement method. Google Search CPC cannot be compared directly with display CPC, nor real-estate lead cost with e-commerce lead cost.
Benchmarks guide planning and hypotheses; they do not guarantee results. Without internal data, they help set realistic expectations, preliminary budgets and test priorities.
🔍 3. Evaluate each channel’s capabilities
Google Ads and Yandex Direct
Search advertising is valuable when demand already exists. Estimate query volume, competition, click cost and potential conversion volume. If demand is limited, more budget will not necessarily produce proportional sales growth.
Meta Ads
Meta supports audience segmentation and rapid testing of messages, visual concepts and offers. It can create demand and acquire customers, but performance depends heavily on the product, creative, setup and optimisation data.
Telegram Ads
Telegram enables placements across its ecosystem using channel topics and other available targeting parameters. Uzbekistan’s large Telegram audience does not itself guarantee conversion. Evaluate targeting options, formats, placement cost and traffic quality.
Programmatic / DV360
These tools can support large-scale display and video campaigns, selected audiences and wider reach. Analyse available inventory, placement transparency, overlap with other platforms and the cost of incremental reach.
YouTube and video advertising
Video can demonstrate a product, explain complex offers and build brand awareness. Results depend on content quality, audience selection and the campaign objective.
Choose a channel because its capabilities match a defined task, not because it is popular.
🧩 4. Account for platform and audience overlap
A company may use Google Ads, DV360, Yandex Direct and several programmatic platforms simultaneously. Some websites and apps are available through multiple systems, so the advertiser may buy impressions on the same resources through different intermediaries without gaining the expected unique reach.
Inventory overlap does not always mean that the same individual users overlap. A complete assessment should examine both.
Before adding another programmatic platform, review which inventory it offers and how different it is from current sources.
For an initial check of websites and apps for Google and Yandex technologies, inTarget created AdStack Scanner: https://intarget.uz/en/scanner.
It identifies signals of these advertising systems but does not itself measure unique reach or actual audience overlap.
🧪 5. No historical data? Form hypotheses and test
A new product or market inevitably starts with hypotheses. Benchmarks can identify promising first tests, but do not allocate the entire budget on assumptions. Reserve a portion for testing.
For example:
- Hypothesis 1: Google Search delivers a lower CAC than Meta Ads.
- Hypothesis 2: Telegram Ads attracts a more qualified audience for this product than other display placements.
- Hypothesis 3: Video outperforms static formats for the selected segment.
- Hypothesis 4: An additional programmatic platform produces measurable incremental reach.
Digital marketing’s advantage is the flexibility to test approaches relatively quickly. Run A/B tests of creative, audiences, offers and landing pages. Compare channels through controlled experiments, comparable campaigns and, where possible, incremental-effect studies.
Each hypothesis needs predefined success criteria, sufficient budget and a suitable test period. Do not conclude after a few clicks or the first leads.
Test results should determine the next budget allocation.
🎯 6. Compare channels by the primary KPI
Consider two channels:
Metric — Channel A — Channel B
Spend — $200 — $800
Leads — 100 — 100
CPL — $2 — $8
Sales — 2 — 15
CAC — $100 — $53.33
Illustrative example.
Channel A looks better by lead cost, but Channel B wins if CAC is the primary KPI.
Define decisive metrics before testing. For sales, assess CAC, purchase conversion, revenue and profitability. For awareness, assess unique reach, frequency and changes in brand awareness. For qualified B2B leads, assess audience fit, progression to a qualified opportunity and conversion to a deal.
The same channel may perform well on one KPI and poorly on another. The lowest CPC or CPM alone cannot select the winner.
💰 7. How to allocate budget after testing
Once initial results are available, optimise the media mix.
Budget does not need to be equal. Increase the share of channels that perform materially better on the primary KPI.
Do not move everything into one channel immediately. Scaling may increase acquisition cost because of limited demand, audience saturation or competition.
Assess marginal efficiency. The channel with the best average CAC may not deliver the best result for the next budget increment.
Retain test capacity. New hypotheses can create opportunities even when the current mix works.
An illustrative reallocation:
Channel — Initially — After tests
Google Ads — 25% — 40%
Meta Ads — 25% — 35%
Telegram Ads — 25% — 15%
Programmatic — 25% — 10%
An example of the principle, not recommended proportions.
The mix should continue to change with the market, seasonality, placement costs and audience behaviour.
🔄 8. A media mix is not a static document
Digital advertising generates regular data, so an annual media mix should not become untouchable.
The optimisation process is:
Historical data → Market benchmarks → Hypotheses → Testing → KPI analysis → Media-mix optimisation.
The update frequency depends on data volume, sales-cycle length and objectives. E-commerce may accumulate results quickly, while real estate or complex B2B can require months.
Flexibility does not mean changing the mix every day. Change it when sufficient evidence exists.
🛠 9. A practical channel-selection process
Step 1. List candidate channels
Identify platforms that can technically reach the audience and fit the campaign task. A preliminary list of three to five promising channels is enough.
Step 2. Collect data for each channel
Review:
- historical campaign results;
- Uzbekistan and industry benchmarks;
- potential target-audience volume;
- forecast CPM, CPC, CPL and other relevant metrics;
- targeting capabilities, formats and restrictions;
- minimum budget for a meaningful test.
Record missing information as uncertainty to be tested.
Step 3. Compare channels using consistent criteria
An example scoring matrix:
Criterion — Weight
Target-audience fit — 25%
Potential performance on primary KPI — 30%
Historical data and benchmarks — 20%
Potential incremental reach — 15%
Analytics and optimisation capabilities — 10%
Weights are illustrative and should be adapted. Score each channel from 1 to 5 and calculate a weighted total.
The matrix does not select a winner automatically, but it makes the decision structured and transparent.
Step 4. Form hypotheses and a test media mix
Choose two to four priority channels. Define a hypothesis, primary KPI, budget and test period for each.
Channel — Hypothesis — Primary KPI
Google Search — Acquires high-intent customers — CAC
Meta Ads — Provides more scalable lead acquisition — CAC
Telegram Ads — Reaches the target audience efficiently — Cost per qualified lead
Programmatic — Adds target-audience reach — Incremental reach
You do not need to launch everything simultaneously. With limited budget, test fewer hypotheses properly rather than collect insufficient data for all of them.
Step 5. Run the test
Use comparable conditions where possible. Test audiences, creative and offers within each channel. When comparing platforms, account for attribution differences and use control groups or other incremental-effect methods where appropriate.
Do not stop after the first positive or negative result.
Step 6. Evaluate the primary KPIs
Compare actual results with target KPIs, historical performance, market benchmarks and alternative channels. Separately assess audience quality, scaling potential and data reliability.
Step 7. Build and optimise the working media mix
Classify channels as:
- Scale — proven efficiency with further growth potential.
- Optimise and retest — promising but insufficient results.
- Reduce or remove — failed to reach target KPIs after a justified test period.
Review budget allocation regularly using actual results and the marginal efficiency of further investment.
The overall process:
Candidate channels → Historical data and benchmarks → Comparison → Hypotheses → Testing → KPIs → Working media mix → Optimisation.
Do not try to find a perfect allocation immediately. Build a process in which each decision becomes better supported by accumulated evidence.
🚀 Conclusion
Channel selection should not depend solely on popularity, agency recommendations or a marketer’s opinion.
Start with historical data and available market benchmarks. Where information is missing, form hypotheses, test them and optimise the media mix using actual results.
Account for platform capabilities, audience potential, inventory overlap and the efficiency of incremental investment.
Digital marketing’s flexibility makes it possible to find a stronger channel combination progressively and redirect budget towards the best-performing decisions.
An effective media mix is not one that contains every popular platform. It is one in which every advertising sum supports a specific business objective.

